ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 560 No POST, No Video, No iLo

 
James R. Baker
Occasional Visitor

DL 560 No POST, No Video, No iLo

After attempting an upgrade of iLo we now have nothing on a server. I have tried using the iLo override switch but that didn't work.
3 REPLIES
Blazhev_1
Honored Contributor

Re: DL 560 No POST, No Video, No iLo

Hi James,

you can take the power cable out, wait 3 0sec , plug it in and turn the server on.

Further you can use the same switch positions 1,5,6 to on to switch to redundant ROM.

Pac
James R. Baker
Occasional Visitor

Re: DL 560 No POST, No Video, No iLo

The power has been off for much longer than 30 sec. at a time.

I have not tried the dipswitches in those positions. I will give it a try.
juan quesada
Respected Contributor

Re: DL 560 No POST, No Video, No iLo

hi,

ILO FW is not linked to the BIOS however if you used FW CD to flash FW to ILO it is probable that you flashed the BIOS also, in this case back up rom will be a good idea, if this does not works stress out the server (minimal configuration) to get video, after that you can add parts to isolate the faulty component

Regards,