HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 585g2 Diagnostic Codes & Buttons

 
Scott Langer
Advisor

DL 585g2 Diagnostic Codes & Buttons

Hello all, I have 2 general DL 585g2 questions here:

1. Does anyone have a link to or can send me a document that states what all the 2 digit codes that can be displayed on the internal Digital Readout mean? thanks.

2. There are 2 buttons on the mobo in the back of the case that I dont know what they are for. If you are looking at the front of the case with the top off... one of them is about 4 inches behind the system dip switches on the right of the rightmost PCI card. The other is back a little further on the left of the rightmost card. Anyone know?

tyia. -Scott L.
4 REPLIES

Re: DL 585g2 Diagnostic Codes & Buttons

regarding the 2 button or the dip switches as they are called, please refer the backside of the access lid or the top cover. it contains all the information about it.
Scott Langer
Advisor

Re: DL 585g2 Diagnostic Codes & Buttons

these are not the DIP SWITCHES, they are buttons... and they are not listed on the back of the cover, I checked that first., thanks though.
KarloChacon
Honored Contributor

Re: DL 585g2 Diagnostic Codes & Buttons

hi Scott

check the manuals here
they can give you some light

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=64180&taskId=101&prodTypeId=15351&prodSeriesId=3219717
Didn't your momma teach you to say thanks!
Scott Langer
Advisor

Re: DL 585g2 Diagnostic Codes & Buttons

I checked the manuals... found a small section in the troubleshooting doc that mentions they are caleld the "System Insight Display LED's"... no menation of what the hell the codes mean. Also no mention of the two buttons in the back?!?! Anyone from HP here to answer this? maybe an internal doc?