DL 760 G2 POST ERROR 220

[Mark J. Francisco]

Recieving the following on a DL760G2:

1. Accelerator Cache Memory Parity Error (Socket 2)
2. ASR Detected By System ROM
3. POST ERROR: 220-Runtime Cache Accelerator Failure

Can anyone please tell me what needs to be replaced?

Thanks much!

[Daniel Leblanc]

ARRAY must be changed

[Mark J. Francisco]

The whole array controller or just the cache module?

[SPa]

220-Runtime Cache Accelerator Failure does not refers to Array.

This cache referes to the cache assigned to the Processors.

Refer to the advisory mentioned on the below link and perform the steps mentioned

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_EH991119_CW01&jumpid=reg_R1002_USEN

[Rajashekar Chintakunta · Accepted solution]

Hi Mark,

Check the following forum if it helps:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1068450

Regards,
Raj.

[Mark J. Francisco]

Tonight I have a window to replace the Processor and memory module (part#278466-001) and to mark the cache error as corrected in RBSU. I'll let everyone know how things go on Monday.

Thanks,
mark

[Oleg Koroz]

Before you replace it, pull power cable out press and hold power button - take all static off, swap CPU around and memory, clear NVRAM see if that helps.

[Mark J. Francisco]

Don't know which step did it but here's what I did.

1.Replaced Proc and Memory module.
2.Marked the error corrected in RBSU

Did this Friday night, and server was good all weekend.

Thanks guys!