ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL 760 G2 POST ERROR 220

 
SOLVED
Go to solution
Mark J. Francisco
Frequent Advisor

DL 760 G2 POST ERROR 220

Recieving the following on a DL760G2:

1. Accelerator Cache Memory Parity Error (Socket 2)
2. ASR Detected By System ROM
3. POST ERROR: 220-Runtime Cache Accelerator Failure

Can anyone please tell me what needs to be replaced?

Thanks much!
7 REPLIES
Daniel Leblanc
Honored Contributor

Re: DL 760 G2 POST ERROR 220

ARRAY must be changed
Mark J. Francisco
Frequent Advisor

Re: DL 760 G2 POST ERROR 220

The whole array controller or just the cache module?
SPa
Trusted Contributor

Re: DL 760 G2 POST ERROR 220

220-Runtime Cache Accelerator Failure does not refers to Array.

This cache referes to the cache assigned to the Processors.

Refer to the advisory mentioned on the below link and perform the steps mentioned

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=PSD_EH991119_CW01&jumpid=reg_R1002_USEN
Rajashekar Chintakunta
Honored Contributor
Solution

Re: DL 760 G2 POST ERROR 220

Hi Mark,

Check the following forum if it helps:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1068450

Regards,
Raj.
Mark J. Francisco
Frequent Advisor

Re: DL 760 G2 POST ERROR 220

Tonight I have a window to replace the Processor and memory module (part#278466-001) and to mark the cache error as corrected in RBSU. I'll let everyone know how things go on Monday.

Thanks,
mark
Oleg Koroz
Honored Contributor

Re: DL 760 G2 POST ERROR 220

Before you replace it, pull power cable out press and hold power button - take all static off, swap CPU around and memory, clear NVRAM see if that helps.

Mark J. Francisco
Frequent Advisor

Re: DL 760 G2 POST ERROR 220

Don't know which step did it but here's what I did.

1.Replaced Proc and Memory module.
2.Marked the error corrected in RBSU

Did this Friday night, and server was good all weekend.

Thanks guys!