ProLiant Servers (ML,DL,SL)

DL 785 G6 Only Shows One CPU

New Member

DL 785 G6 Only Shows One CPU

Everythings green, and updated.  This server was mothballed and braught back to be a test box but I can only get one CPU to show up.  I have tried reseting everything to defaults, trying replacement blades, unplugging all but two of hte blades.  

Bios version is A15 05/02/2011.

Shows Proc 1: AMD 2.80GHZ, GMB L3 Cache, and 2 through 8 as Not Installed.

Anybody have any ideas? 


Re: DL 785 G6 Only Shows One CPU


Please refer to this server's QuickSpecs and see if the compatibility matches.
NOTE: A minimum of two DIMMs (1 kit) must be installed per processor.

Also refer to the Servers User Guide and Maintenance Guide to check if you have installed the hardware properly.

There is "Processor-related port 85 codes" in the maintenance guide.


Thank You!
I am a HPE employee
Was the post useful? Click on the white KUDOS! Thumb below.  Kudos is a way of saying thank you to a post.
// Useful Links for ProLiant Servers / Community FAQ / Rules of Participation / Servers Blog //

I work for HPE

Accept or Kudo