HPE Community
ProLiant Servers (ML,DL,SL)
1751863 Members
5414 Online
108782 Solutions
New Discussion

DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

 
MegaInformatica
Senior Member

‎01-08-2016 10:48 AM - edited ‎01-08-2016 11:32 AM

‎01-08-2016 10:48 AM - edited ‎01-08-2016 11:32 AM

DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

Hi All!

I have a  DL120G6 server, CPU G6950, RAM 2x1GB.
It has not been used for months, now I need it but I have some problems.
At every boot, all CMOS values are cleared, so ... no RAID, no IPMI/BMC.
The RTC-Battery signed 2.9v so I changed with a new 3.3v one, but nothing changed.

It hangs on SERVER ASSET TEXT message for a while (10 minutes at least!) then it starts.
When I put a cable into BMC net-port nothing happens (no lights) and no DHCP-request are sent on LAN.

Version of firmwares was : ILO 4.22A, BIOS O26 2011.04.14A
Now I updated them to: ILO 4.26A, BIOS O26 2013.07.01A
Nothing has changed.

There are no red-leds (not in front, not on board).
There are no messages at startup.

I really don't know what to think (and what to try), give me any idea, please.
--
Alex

0 Kudos
Reply
5 REPLIES 5
MegaInformatica
Senior Member

‎01-10-2016 03:52 AM

‎01-10-2016 03:52 AM

Re: DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

Not replies, yet ... :(

I think the problem could be corrupted BMC data, that prevent system to correctly comunicate and cause mess at startup.

I'm trying to access ILO data with lo100cfg/ipmitool/ipmiutil and I can see that some info are not locally accessible , because of insufficient privileges, and I think they should be (BMC-LAN settings for example)

Here some output, I think it's not the correct response to my requests:

C:\Temp>lo100cfg.exe -s

<lo100cfg>
   <summary>
      <firmware version="4.26" />
      <hardware version="1.0" />
      <ipmi version="2.0" />
      <features>
         <remote_storage status="full" />
         <web_services status="full" />
         <remote_kvm status="full" />
         <ssh_ssl status="full" />
      </features>
   </summary>
   <license_key key="*****-*****-*****-*****-*****" />
   <power />
   <serial_port />
   <nic>
      <ipv4 />
      <firewall />
   </nic>
   <users>
   </users>
</lo100cfg>
Lights Out 100 command error : 0xd4.

 

 

C:\Temp>ipmiutil.exe config

ipmiutil ver 2.40
bmcconfig ver 2.40 
-- BMC version 4.26, IPMI version 2.0 
GetLanEntry: completion code=d4
GetBmcEthDevice: GetLanEntry failed
### bmcconfig, GetPefEntry ...
GetPefEntry(6/1): completion code=d4
GetPefEntry(1), ret = -1
GetPefEntry(6/2): completion code=d4
GetPefEntry(2), ret = -1
GetPefEntry(6/3): completion code=d4
GetPefEntry(3), ret = -1
GetPefEntry(6/4): completion code=d4
GetPefEntry(4), ret = -1
GetPefEntry(6/5): completion code=d4
GetPefEntry(5), ret = -1
GetPefEntry(6/6): completion code=d4
GetPefEntry(6), ret = -1
GetPefEntry(6/7): completion code=d4
GetPefEntry(7), ret = -1
GetPefEntry(6/8): completion code=d4
GetPefEntry(8), ret = -1
GetPefEntry(6/9): completion code=d4
GetPefEntry(9), ret = -1
GetPefEntry(6/10): completion code=d4
GetPefEntry(10), ret = -1
GetPefEntry(6/11): completion code=d4
GetPefEntry(11), ret = -1
GetPefEntry(6/12): completion code=d4
GetPefEntry(12), ret = -1
GetPefEntry(6/13): completion code=d4
GetPefEntry(13), ret = -1
GetPefEntry(6/14): completion code=d4
GetPefEntry(14), ret = -1
GetPefEntry(6/15): completion code=d4
GetPefEntry(15), ret = -1
GetPefEntry(6/16): completion code=d4
GetPefEntry(16), ret = -1
GetPefEntry(6/17): completion code=d4
GetPefEntry(17), ret = -1
GetPefEntry(6/18): completion code=d4
GetPefEntry(18), ret = -1
GetPefEntry(6/19): completion code=d4
GetPefEntry(19), ret = -1
GetPefEntry(6/20): completion code=d4
GetPefEntry(20), ret = -1
GetPefEntry(1/0): completion code=d4
GetPefEntry(2/0): completion code=d4
GetPefEntry(3/0): completion code=d4
GetPefEntry(4/0): completion code=d4
GetPefEntry(9/1): completion code=d4
GetPefEntry(9/2): completion code=d4
GetPefEntry(9/3): completion code=d4
GetPefEntry(9/4): completion code=d4
### bmcconfig, GetLanEntry for channel 1 ...
GetLanEntry: completion code=d4
GetLanEntry(1,0,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,1,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,2,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,3,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,4,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,5,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,6,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,7,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,10,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,11,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,12,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,13,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,14,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,15,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,16,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,17,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,18,1), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,19,1), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,192,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,193,0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1,194,0), ret = -1
GetChanAcc: completion code=cc
GetLanEntry(1,201,0), ret = -1
### bmcconfig, GetSOL for channel 1 ...
SOL Enable ccode = d4
SOL Auth ccode = d4
SOL Accum Interval ccode = d4
SOL Retry ccode = d4
SOL nvol Baud ccode = d4
SOL vol Baud ccode = d4
SOL Payload Support error 0, ccode = cc
SOLPayloadAccess 1,1: 00 00 00 00
SOLPayloadAccess 1,2: 00 00 00 00
SOLPayloadAccess 1,3: 00 00 00 00
UserAccess 1,1: 10 4a 01 35 
UserName     1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,2: 10 4a 01 14 
UserName     2: 41 44 4d 49 4e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,3: 10 4a 01 35 
UserName     3: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,4: 10 4a 01 35 
UserName     4: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,5: 10 4a 01 35 
UserName     5: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 5: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,6: 10 4a 01 35 
UserName     6: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,7: 10 4a 01 35 
UserName     7: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 7: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,8: 10 4a 01 35 
UserName     8: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,9: 10 4a 01 35 
UserName     9: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,10: 10 4a 01 35 
UserName     10: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,11: 10 8a 01 35 
UserName     11: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 11: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,12: 10 8a 01 35 
UserName     12: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 12: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,13: 10 8a 01 35 
UserName     13: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 13: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,14: 10 8a 01 35 
UserName     14: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 14: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,15: 10 8a 01 35 
UserName     15: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 15: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 1,16: 10 8a 01 35 
UserName     16: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
### bmcconfig, GetSerEntry for channel 4 ...
GetSerEntry(0): completion code=d4
GetSerEntry(1): completion code=d4
GetSerEntry(2): completion code=d4
GetSerEntry(3): completion code=d4
GetSerEntry(4): completion code=d4
GetSerEntry(5): completion code=d4
GetSerEntry(6): completion code=d4
GetSerEntry(7): completion code=d4
GetSerEntry(8): completion code=d4
GetSerEntry(9): completion code=d4
GetSerEntry(10): completion code=d4
GetSerEntry(11): completion code=d4
GetSerEntry(12): completion code=d4
GetSerEntry(13): completion code=d4
GetSerEntry(14): completion code=d4
GetSerEntry(15): completion code=d4
GetSerEntry(16): completion code=d4
GetSerEntry(17): completion code=d4
GetSerEntry(17): completion code=d4
GetSerEntry(17): completion code=d4
GetSerEntry(17): completion code=d4
GetSerEntry(18): completion code=d4
GetSerEntry(19): completion code=d4
GetSerEntry(19): completion code=d4
GetSerEntry(19): completion code=d4
GetSerEntry(19): completion code=d4
GetSerEntry(29): completion code=d4
ChannelAccess 4: 23 04 
UserAccess 4,1: 10 4a 01 35 
UserName     1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 1: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,2: 10 4a 01 35 
UserName     2: 41 44 4d 49 4e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 2: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,3: 10 4a 01 35 
UserName     3: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 3: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,4: 10 4a 01 35 
UserName     4: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 4: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,5: 10 4a 01 35 
UserName     5: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 5: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,6: 10 4a 01 35 
UserName     6: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 6: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,7: 10 4a 01 35 
UserName     7: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 7: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,8: 10 4a 01 35 
UserName     8: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 8: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,9: 10 4a 01 35 
UserName     9: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 9: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,10: 10 4a 01 35 
UserName     10: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,11: 10 8a 01 35 
UserName     11: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 11: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,12: 10 8a 01 35 
UserName     12: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 12: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,13: 10 8a 01 35 
UserName     13: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 13: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,14: 10 8a 01 35 
UserName     14: 4f 70 65 72 61 74 6f 72 00 00 00 00 00 00 00 00
# UserPassword 14: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,15: 10 8a 01 35 
UserName     15: 61 64 6d 69 6e 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 15: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
UserAccess 4,16: 10 8a 01 35 
UserName     16: 4f 45 4d 00 00 00 00 00 00 00 00 00 00 00 00 00
# UserPassword 16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
bmcconfig, error -1

 

C:\Temp>ipmiutil.exe lan

ipmiutil ver 2.40
pefconfig ver 2.40 
-- BMC version 4.26, IPMI version 2.0 
GetLanEntry: completion code=d4
GetBmcEthDevice: GetLanEntry failed
pefconfig, GetPefEntry ...
GetPefEntry(6/1): completion code=d4
GetPefEntry(1), ret = -1
GetPefEntry(6/2): completion code=d4
GetPefEntry(2), ret = -1
GetPefEntry(6/3): completion code=d4
GetPefEntry(3), ret = -1
GetPefEntry(6/4): completion code=d4
GetPefEntry(4), ret = -1
GetPefEntry(6/5): completion code=d4
GetPefEntry(5), ret = -1
GetPefEntry(6/6): completion code=d4
GetPefEntry(6), ret = -1
GetPefEntry(6/7): completion code=d4
GetPefEntry(7), ret = -1
GetPefEntry(6/8): completion code=d4
GetPefEntry(8), ret = -1
GetPefEntry(6/9): completion code=d4
GetPefEntry(9), ret = -1
GetPefEntry(6/10): completion code=d4
GetPefEntry(10), ret = -1
GetPefEntry(6/11): completion code=d4
GetPefEntry(11), ret = -1
GetPefEntry(6/12): completion code=d4
GetPefEntry(12), ret = -1
GetPefEntry(6/13): completion code=d4
GetPefEntry(13), ret = -1
GetPefEntry(6/14): completion code=d4
GetPefEntry(14), ret = -1
GetPefEntry(6/15): completion code=d4
GetPefEntry(15), ret = -1
GetPefEntry(6/16): completion code=d4
GetPefEntry(16), ret = -1
GetPefEntry(6/17): completion code=d4
GetPefEntry(17), ret = -1
GetPefEntry(6/18): completion code=d4
GetPefEntry(18), ret = -1
GetPefEntry(6/19): completion code=d4
GetPefEntry(19), ret = -1
GetPefEntry(6/20): completion code=d4
GetPefEntry(20), ret = -1
GetPefEntry(1/0): completion code=d4
GetPefEntry(2/0): completion code=d4
GetPefEntry(3/0): completion code=d4
GetPefEntry(4/0): completion code=d4
GetPefEntry(9/1): completion code=d4
GetPefEntry(9/2): completion code=d4
GetPefEntry(9/3): completion code=d4
GetPefEntry(9/4): completion code=d4

pefconfig, GetLanEntry for channel 1 ...
GetLanEntry: completion code=d4
GetLanEntry(0), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(1), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(2), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(3), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(4), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(5), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(6), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(7), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(10), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(11), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(12), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(13), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(14), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(15), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(16), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(17), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(18), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(19), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(192), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(193), ret = -1
GetLanEntry: completion code=d4
GetLanEntry(194), ret = -1
GetChanAcc: completion code=cc
Channel Access Mode(1=lan): ce 0e : Access = Always Avail, PEF Alerts Enabled
GetLanEntry(201), ret = -1
pefconfig, GetSOL for channel 1 ...
SOL Enable ccode = d4
SOL Auth ccode = d4
SOL Accum Interval ccode = d4
SOL Retry ccode = d4
SOL nvol Baud ccode = d4
SOL vol Baud ccode = d4
SOL Payload Support error 0, ccode = cc
SOL Payload Access(1,1): 00 00 00 00 : disabled
SOL Payload Access(1,2): 00 00 00 00 : disabled
SOL Payload Access(1,3): 00 00 00 00 : disabled
SOL Payload Access(1,4): 00 00 00 00 : disabled
Users:  showing 10 of max 16 users (10 enabled)
Get User Access(chan1,user1): 10 4a 01 35 : IPMI, OEM    ()
Get User Access(chan1,user2): 10 4a 01 14 : IPMI, Admin  (ADMIN)
Get User Access(chan1,user3): 10 4a 01 35 : IPMI, OEM    (admin)
Get User Access(chan1,user4): 10 4a 01 35 : IPMI, OEM    (OEM)
Get User Access(chan1,user5): 10 4a 01 35 : IPMI, OEM    (Operator)
Get User Access(chan1,user6): 10 4a 01 35 : IPMI, OEM    (admin)
Get User Access(chan1,user7): 10 4a 01 35 : IPMI, OEM    (OEM)
Get User Access(chan1,user8): 10 4a 01 35 : IPMI, OEM    (Operator)
Get User Access(chan1,user9): 10 4a 01 35 : IPMI, OEM    (admin)
Get User Access(chan1,user10): 10 4a 01 35 : IPMI, OEM    (OEM)
pefconfig, completed successfully

 

Anybody out there ?
Any IPMI/BMC/ILO guru ?

Is it possible that it only happened to me ? :O

 

0 Kudos
Reply
Jimmy Vance
HPE Pro

‎01-11-2016 09:12 AM

‎01-11-2016 09:12 AM

Re: DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

@MegaInformatica wrote:

Hi All!

I have a  DL120G6 server, CPU G6950, RAM 2x1GB.
It has not been used for months, now I need it but I have some problems.
At every boot, all CMOS values are cleared, so ... no RAID, no IPMI/BMC.
The RTC-Battery signed 2.9v so I changed with a new 3.3v one, but nothing changed.

It hangs on SERVER ASSET TEXT message for a while (10 minutes at least!) then it starts.
When I put a cable into BMC net-port nothing happens (no lights) and no DHCP-request are sent on LAN.

Version of firmwares was : ILO 4.22A, BIOS O26 2011.04.14A
Now I updated them to: ILO 4.26A, BIOS O26 2013.07.01A
Nothing has changed.

There are no red-leds (not in front, not on board).
There are no messages at startup.

I really don't know what to think (and what to try), give me any idea, please.
--
Alex

Use the maintenance switch 6 and reset the system to factory defaults.  I think the dedicated BMC port on that system was an option, so the BMC could be in shared mode which uses NIC port1.  The DL120 G6 has the HP Lights-Out 100i (lo100i) and not HP iLO.  

 

 

No support by private messages. Please ask the forum! 
0 Kudos
Reply
MegaInformatica
Senior Member

‎01-12-2016 06:25 AM

‎01-12-2016 06:25 AM

Re: DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

Thanks for your reply.

The LO100i of DL120G6 has a dedicated port (there are 3 NICs, nic1 nic2 nicMgmt). It has been used it for years without any problem, then swithced off.

Now I have to use it and somghint in the IPMI/BMC interface is bricked.

With OpenIpmi tools (on linux) I can modify users but every access to FRU or LAN or other settings give a 0xD4 insufficent privileges.

Explain me about SW6. I cannot find it on board (and not on manual).
 

I have an SW4 System Maintenance Switch with this layout

S1 Off = Normal | On = Clears the BIOS CMOS and rests the administrator password.
S2 Off = Normal BIOS boot block | On = Recovery BIOS boot block
S3 Off = Disables the RAID key | On = Enables the RAID key.
S4 Off Reserved
S5 Off Reserved
S6 Off Reserved 
S7 Off Reserved
S8 Off Reserved

I found all OFF, and already tried to clear CMOS but nothing changed.
There is no FACTORY DEFAULT switch, as I know.

I also tried with BMC RECOVERY MODE, and oddly when in recovery mode cmos settings are saved correctly! but of course there ILO not enabled.

0 Kudos
Reply
Torsten.
Acclaimed Contributor

‎01-12-2016 06:39 AM

‎01-12-2016 06:39 AM

Re: DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

Since this is a proliant "light" only, it works different compared to ther proliants.

S1 on clears the BIOS.

 


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
MegaInformatica
Senior Member

‎01-12-2016 10:20 AM

‎01-12-2016 10:20 AM

Re: DL120 G6 doesn't start (soon) and doesn't keep cmos settings, no fail detected

Setting S1 to on, cause system not to start, when you set back to off it restart with BIOS settings cleared, but BMC settings seems untouched.
I can see old ilo-user I tried to set with ipmi and still insufficent privileges to almost all request.

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.