ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL140 G1 Red Light

Tech_User
Occasional Contributor

DL140 G1 Red Light

Hello All

I have noticed the red light appear on the DL140 server, currently running NT4. I have opened the lid to check the internal LEDs and noticed a flashing green LED light on left side of the board (looking from the front).
I can't find a manual that will show what and why this is flashing. Can you someone please guide me to a manual for this.

Many Thanks
Jun1or
3 REPLIES
KarloChacon
Honored Contributor

Re: DL140 G1 Red Light

hi Tech

check this PDf, page 41

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01129978/c01129978.pdf

regards
Didn't your momma teach you to say thanks!
Tech_User
Occasional Contributor

Re: DL140 G1 Red Light

Karlo

Many thanks for the manual.
This has narrowed down my search. The Red light could mean anything from Processor to one fan failure. Checking these is not a problem, some errors are difficult to find.

The server has Windows NT4 installed. Is there a tool i can run to find out what is causing the red light?

Thanks
tlindsey
Occasional Visitor

Re: DL140 G1 Red Light

I have a quick question about the Red Server Status LED. Once you determine and fix the error and clear the log using the ipmitool sel clear command. How do you reset the LED light so it is no longer red?

Thanks.