DL140 G2 VLAN Support

[Andrew Bell_3]

I have a DL140 G2 running Windows Server 2003, and I want to set up multiple VLANs on one NIC. (Using the embedded broadcom NICs.)

I can do this on my other servers using the NIC teaming utility, but the utility does not install on this server - the message is that there is no supported hardware installed.

Anyone know how to do this? The server documentation is completely useless in this area.

[Terry Hutchings · Accepted solution]

The Network configuration utility (NIC teaming) will only work on NC series nics. The embedded are standard broadcom nics, not NC series.

The BACS utility (Broadcom Advanced Control Suite) will allow you to configure vlans. This is available at the following url:
http://h18000.www1.hp.com/support/files/server/us/download/20676.html

[Andrew Bell_3]

Thanks, that looks like what I wanted. It's not listed in the DL140 G2 downloads, only under the DL140.