DL140 G3 Broadcom NIC Teaming?

[R S Burnell]

I'm sure that they are the Broadcom 5721 NIC's and I downloaded the latest driver for them from the Broadcom site (couldn't find them on the HP site).

I'll try the download that you've suggested and let you know how I get on.

Thanks for your help

Russell

[R S Burnell]

I've just looked at the Google URL you posted and it just goes around in a big circle and I end up back at the HP page that I originally started at (the one where you enter the Server Name and it comes up with all the drivers, except the one I'm looking for)!

I think we'll have to call this a lost cause and I'll look at using the Windows NLB feature instead.

Thanks for your help, much appreciated.

Russell

[Capel]

hi

I mentioned google link... but dont worry the application is dead, I just link the cache page and it does not work just shows the link the file can not be downloaded

So... did you tried this one

this utility can be used to team those cards
Broadcom Advanced Control Suite (BACS)
which I found here in (see attached file sceen shot to show you which is the file)

"Windows Management Applications" section (below in the site)

http://www.broadcom.com/support/ethernet_nic/netxtremeii.php


try this and let me know
regards

[KarloChacon]

jejjee

that was my other Nickname...

hi

I mentioned google link... but dont worry the application is dead, I just link the cache page and it does not work just shows the link the file can not be downloaded

So... did you tried this one

this utility can be used to team those cards
Broadcom Advanced Control Suite (BACS)
which I found here in (see attached file sceen shot to show you which is the file)

"Windows Management Applications" section (below in the site)

http://www.broadcom.com/support/ethernet_nic/netxtremeii.php


try this and let me know
regards

[KarloChacon]

hi

try the one above BACS

http://www.cs.uwaterloo.ca/~brecht/servers/docs/PowerEdge-2600/en/Broadcom/UG/BACS.htm

regards

[KarloChacon]

hi

did you get any answer fro HP phone support?

or did you try installing

Broadcom Advanced Control Suite (BACS)
which I found here in (see attached file sceen shot to show you which is the file)
"Windows Management Applications" section (below in the site)

http://www.broadcom.com/support/ethernet_nic/netxtremeii.php

regards

[KarloChacon]

hi

maybe you already fixed your issue R S Burnell

but just to let you know I had the chance to test BACS and worked for me fine
you only need .net framework 2.0 so BACS will work great

check attached file

Broadcom Advanced Control Suite (BACS) - NIC teaming 5721