DL140 G3 SAS RAID monitoring

[Pierrot Robert]

How do you monitor if there is a failed hard drive on a DL140 G3 SAS Hot-Plug in RAID1?

I tried to install HP Storage Manager and it does not find any RAID adapter.

Thank you.

[Rajashekar Chintakunta · Accepted solution]

Hi Pierrot Robert,

This server support either the HP Embedded SATA RAID Controller or HP 8 Internal Port SAS HBA.

If you are using HP Embedded SATA RAID Controller then HP SATA RAID Controller Manager should work:
http://h18007.www1.hp.com/support/files/server/us/download/24806.html

If you are using HP 8 Internal Port SAS HBA,
then you might need to use LSI MyStorage Manager:
http://www.lsi.com/cm/License.do?url=http://www.lsi.com/files/support/ssp/fusionmpt/Utilities/MyStorageInstaller_Windows_STD_GCA_03_00_00.zip&prodName=LSISAS1068&subType=Miscellaneous&locale=EN

Regards,
Raj.

[Pierrot Robert]

Thanks, I needed the LSI software. It works OK now.