ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL140 G3 - Use of Intel 5400 family possible

Sebastian Fränk
Occasional Visitor

DL140 G3 - Use of Intel 5400 family possible

As 5300 CPUs are at EOL, does the mainboard also support the use of 5400 series (LGA771)?
3 REPLIES
marcus1234
Honored Contributor

Re: DL140 G3 - Use of Intel 5400 family possible

hmm sebastian

this lists all valid upgrades and part numbers too

http://h18000.www1.hp.com/products/quickspecs/12509_na/12509_na.HTML


enjoy :)


This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33
Sebastian Fränk
Occasional Visitor

Re: DL140 G3 - Use of Intel 5400 family possible

Any unofficial experience with 54XX processors?
marcus1234
Honored Contributor

Re: DL140 G3 - Use of Intel 5400 family possible

sebastian in a server enviroment i would not experiment , if it had any kind of server purpose,at all


as there is extremely little to gain and a lot to lose mainly reliability,If

i have over clocked cpu from the vectra 33hz and 66hz long time ago cutting in to chips and making traces etc, played with water and vapour chilled , but thats for fun
even used external psu to power up vodoo cards ,
and raise voltages on graphic card slots , but that was for fun..

if you are still curious try it and feed back



This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33