DL140 G3 controller SAS driver

[meekrob]

Hi ,

i have to install a DL140 G3 server , with one HotPlug 80 Gb SATA hard drive ,
the problem is i can not detect the hard drive at the Windows 2003 installation
on the boot when i press F8 , it gives to me
Adapter PCI Slot FW Revision Status Boot order

SAS1068 02 1.16.30.00-IR Enabled 0


WHERE i can found the driver for this controller ?

Thank you

[KarloChacon]

well your server can have one of these controllers


--HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting RAID 0,1 on Non-Hot Plug SATA Models

Driver
http://h18023.www1.hp.com/support/files/server/us/download/26742.html


--HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SAS/SATA Models

driver
http://h18023.www1.hp.com/support/files/server/us/download/27275.html

http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/15351-15351-3328412-241644-3328421-1842838.html

regards

[meekrob]

Hi ,

i have installed the cp007781.exe and now i can detect the hard drive ,
but it gives me now that need the floppy
LSI Logic Fusion-MPT SAS Storport Driver

am i blocked now ??

[maurizio di salvo]

thanks a hp support this is a solution.

i have ml 150 g3 with sas lsilogic and 4 hdd 72gb.

you take usb floppy and attach it at your pc xp, when xp see the floppy go in hardware manager---->explode usb controller and click in propriety on your usb device go in advanced and search ID HARDWARE, now write on the paper the second line es: USB\Vid.....2020, respect upper and lower letter. Now thake file txtsetup.oem that you have download with driver hp 8 port sas controller from hp site and in [hardware...]
copy and past last line es: "PCI....." "lsi_sas" and modify writing "USB\Vid........" "usbstor" now your floppy is recognize that w2003 os and don't ask you anymore insert floppy for lsi sas mpt-fusion storport driver.

excuse for my english. i hope i help you.

bye