ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

DL140 G3 controller SAS driver

Super Advisor

DL140 G3 controller SAS driver

Hi ,

i have to install a DL140 G3 server , with one HotPlug 80 Gb SATA hard drive ,
the problem is i can not detect the hard drive at the Windows 2003 installation
on the boot when i press F8 , it gives to me
Adapter PCI Slot FW Revision Status Boot order

SAS1068 02 Enabled 0

WHERE i can found the driver for this controller ?

Thank you
Honored Contributor

Re: DL140 G3 controller SAS driver

well your server can have one of these controllers

--HP Embedded SATA RAID Controller (integrated into the south-bridge) supporting RAID 0,1 on Non-Hot Plug SATA Models


--HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SAS/SATA Models


Didn't your momma teach you to say thanks!
Super Advisor

Re: DL140 G3 controller SAS driver

Hi ,

i have installed the cp007781.exe and now i can detect the hard drive ,
but it gives me now that need the floppy
LSI Logic Fusion-MPT SAS Storport Driver

am i blocked now ??

maurizio di salvo
Frequent Advisor

Re: DL140 G3 controller SAS driver

thanks a hp support this is a solution.

i have ml 150 g3 with sas lsilogic and 4 hdd 72gb.

you take usb floppy and attach it at your pc xp, when xp see the floppy go in hardware manager---->explode usb controller and click in propriety on your usb device go in advanced and search ID HARDWARE, now write on the paper the second line es: USB\Vid.....2020, respect upper and lower letter. Now thake file txtsetup.oem that you have download with driver hp 8 port sas controller from hp site and in [hardware...]
copy and past last line es: "PCI....." "lsi_sas" and modify writing "USB\Vid........" "usbstor" now your floppy is recognize that w2003 os and don't ask you anymore insert floppy for lsi sas mpt-fusion storport driver.

excuse for my english. i hope i help you.