ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL140 G3 firmware upgrade

 
Antonio_73
Advisor

DL140 G3 firmware upgrade

I have problems to understand how to upgrade DL140 G3 firmware (I've got a used server I want to put at work).
I've tried 8.60 firmware CD, and, when booting, I've the message "use 7.40b version".
I've downloaded 7.40b, burned a CD, it boots then enters a bash shell, and I don't know what to do nextly.
Any suggestion?
3 REPLIES

Re: DL140 G3 firmware upgrade

Hi,

DL140 G3, firmware maintenance cd is not supported.
You can only update BIOS,Controller card and the ILO.

regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.

Re: DL140 G3 firmware upgrade

Firmware maintenance cd for ML300 and 500 Series.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.
Antonio_73
Advisor

Re: DL140 G3 firmware upgrade

Do you mean, I have to update using single procedures, each one for each component?