DL145 G2 boot from QLogic HBA ?

[Nick Lunt]

Hello,

I need to get this machine to boot off our EVA SAN through its QLogic card.

I've enabled the card in FastUtil and installed the OS onto the LUN presented from the EVA, however I cannot find where to enable the system to boot from the Qlogic card in the BIOS. Indeed the BIOS does not even seem to have this functionality.

The bios details are ID: O05 and Version 2.13.

Does anyone have any experience of this ?

Many thanks,
Nick .

[Oleg Koroz · Accepted solution]

Page 2 Required hardware
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00580093/c00580093.pdf


ftp://ftp.compaq.com/pub/products/servers/support/Boot_from_SAN_Firmware_Support_Matrix.pdf

[Oleg Koroz]

ftp://ftp.compaq.com/pub/products/servers/support/Boot_from_SAN_Firmware_Support_Matrix.pdf


see attachment if you can open

[Nick Lunt]

Gaarghh! Thanks KOV.