ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL145 G2 do not start!

 
SOLVED
Go to solution
Fredrik Källgren
Occasional Visitor

DL145 G2 do not start!

Hi.

My HP DL145G2 dont want to start. It hangs in BIOS-startup. These are the only line that is showing up on my screen:

"
Phoenix ServerBIOS 3 Release 6.1
Copyright 1985.2004 Phoenix Technologies Ltd.
All Rights Reserved
HP System BIOS - O05 (10/20/05)
CPU0 =AMD Opteron(tm) Processor 246
CPU Stepping = E4 2000MHz
MemClk = 2000Mhz Tcl = 3.0 Trcd = 3 Tras = 8 Trp = 3
LDT Frequency = 1000Mhz LDT Width = 16bit DOWN - 16bit UP
"

These are the only lines that comes up. Anyone of you guys know what has happend?

Regards Fredrik
6 REPLIES
tripper91
Frequent Advisor

Re: DL145 G2 do not start!

have u tried clearing the NVRAM?
Fredrik Källgren
Occasional Visitor

Re: DL145 G2 do not start!

I've tried but I can't enter setup. The computer stops up after printing "Entering SETUP ..."

Could this have something to do with BIOS-password?

KarloChacon
Honored Contributor
Solution

Re: DL145 G2 do not start!

did you clean the nvram?

see here


http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00368711/c00368711.pdf
pages
69
87

and reseat components

regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: DL145 G2 do not start!

well the BIOS a little old (10/20/05)

latest version
Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL145 G2 Servers
2.17 B
4 Oct 06

but I think you ca not updating it

regards
Didn't your momma teach you to say thanks!
Fredrik Källgren
Occasional Visitor

Re: DL145 G2 do not start!

It worked.

Tanks Karlo for all your help.

This really saved my day.


/Fredrik
KarloChacon
Honored Contributor

Re: DL145 G2 do not start!

that's great
Didn't your momma teach you to say thanks!