ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL145 G2 network teaming

 
SOLVED
Go to solution
Michael Gjernes
Occasional Visitor

DL145 G2 network teaming

How can I enable network teaming for the dual integrated Broadcom BCM5721 controllers on a DL145 G2? Apparently I need the Broadcom BACS or BASP software, which, according to Broadcom's site, is included on the CD with the system. It is not on the HP server support CD that I received. I did find a download of BACS on HP's site for a DL140, but will this work on a DL145 G2?
3 REPLIES
Miika T
Valued Contributor
Solution

Re: DL145 G2 network teaming

BACS is used with other vendors aswell, it it is not model depended. Go ahead and use it.

-Miika
Michael Gjernes
Occasional Visitor

Re: DL145 G2 network teaming

Thanks - it does install and function correctly on the DL145, even though the install "readme" only lists the DL140. Simple to set up for smart load balancing. Automatic fail over is working perfectly.
Michael Gjernes
Occasional Visitor

Re: DL145 G2 network teaming

See the post from Miika T. and my reply. The install source for Broadcom BACS with BASP does not matter.