HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 


Pierluigi Cecchi
Occasional Contributor


I have replaced a System Board on a DL145-G2, and need to change the serial number.
I've entered the Phoenix Bios Setup, but from the main screen I'm only able to read its field. I've found no way to change it.
All documentations I found on Cybrary tell nothing about it.

Where can I find any indication?

Best regards in advance

Pierluigi Cecchi
Trusted Contributor

Re: DL145-G2

You will have to use the utility available on the below link to change the serial number


This will create a diskette that can be used to change the serial number