HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL145 G3 Sata Raid

 
Nathan Overley
Occasional Visitor

DL145 G3 Sata Raid

I have a new HP Proliant DL145 G3 server.

I am trying to configure the two 80GB sata drives for mirroring with the Smart Array E200.

I can not find the option in either the BIOS or the POST.

Can someone please help me?

Thanks,
Nathan
4 REPLIES
KarloChacon
Honored Contributor

Re: DL145 G3 Sata Raid

when the controller in detecting during POST press F8, to get inside ORCA and make the RAID 1.

regards
Didn't your momma teach you to say thanks!
Nathan Overley
Occasional Visitor

Re: DL145 G3 Sata Raid

Thanks for your response. I tried that and it didn't work.

When it is detecting the sata drives, the top of the screen says "ServerWorks serial ATA controller....etc"

Could it be that the E200 isn't enabled for some reason?

Thanks,

Nathan
KarloChacon
Honored Contributor

Re: DL145 G3 Sata Raid

mmmm trying updating firmware

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01054049〈=en&cc=us&taskId=101&prodSeriesId=3219755&prodTypeId=15351

Didn't your momma teach you to say thanks!
Nathan Overley
Occasional Visitor

Re: DL145 G3 Sata Raid

Well I guess that explains it. When I try to flash it, it tells me that the controller isn't found. I'm pretty sure his server was supposed to come with the E200 but maybe they messed up.

Thanks for your help!