ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL145 G3 system event log

 

DL145 G3 system event log

Hi.

I have a couple of DL145 G3 servers. Problem is that several of it post message on booting
about sytem event log, enter setup to view. I enter the BIOS and there is no system event log under advanced, IPMI menu. I tried clearing CMOS and putting out battery on motherboard, but it did not solve problem. Tried reseating all CPU, memory and even removing fan when server was operating. Then I can enter system event log and enable clearing system event log on next boot. After that message still exists, but I can not enter system event log again. On some servers removing battery solved this problem, clearing CMOS did not solve my problem. Health LED is OK. Can someone help me with it.
3 REPLIES
James ~ Happy Dude
Honored Contributor

Re: DL145 G3 system event log

Hello Mislav,

Can you provide us with the POST error messages.

Regards,
James.

Re: DL145 G3 system event log

Problem solved by updating with new BIOS firmware. Since it is 100 series POST error was just thet there is event log and to enter Setup. When i could ebter system log menu under Advanced - IPMI menu, there was some digital discrete log.

Re: DL145 G3 system event log

See response above.