DL145 g2 RAID

[marco melli_1]

hello,
i just bought an used server dl 145 g2, with 2 72GB uwscsi drives.
I am wondering if the built in controller in the server supports RAID 1.
Any Idea, how to do it?

Regards

[TTr · Accepted solution]

The G2 does not have a raid controller option, it has a simple scsi controller (non-raid).
Look at the quickspecs on
http://h18000.www1.hp.com/products/quickspecs/11910_div/11910_div.HTML

No raid1 for you.

There is a very small possibility that the previous owner upgraded the SCSI contrroller with a SCSI raid controller but to figure that out you have to open the server and check the controller itself.

Or during boot-up look the scsi controller has a bios extension to get in and configure it. You can check that out.