cancel
Showing results for 
Search instead for 
Did you mean: 

DL160 G5

 
w0rm5
Occasional Visitor

DL160 G5

Hi, i bought 4x4GB ram for my server, right from hp, but it does not recognize over 10 GB i have two, the same occour on both of them.

Need help
4 REPLIES
Gus Kwong
Respected Contributor

Re: DL160 G5

There are eight DIMM slots in total --- What are the slot numbers currently installed with your modules?
Learning never ends
w0rm5
Occasional Visitor

Re: DL160 G5

they are paired according to the manual, like 5-7 6-8 and so on, even if I change it still reads only 10GB, whe I bought it said it supports up to 64GB, I´m using w2k8 - X64
w0rm5
Occasional Visitor

Re: DL160 G5

they are paired according to the manual, like 5-7 6-8 and so on, even if I change it still reads only 10GB, whe I bought it said it supports up to 64GB, I´m using w2k8 - X64, also on one machine it reads 5GB on the other I added 2x4GB and it reads only 7, this secind runs linux so, it cannot be an OS issue, since it reads only 10240MB on both BIOS
Gus Kwong
Respected Contributor

Re: DL160 G5

It appears it should have been slot 1&3, and then 5&7 according to http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01325420/c01325420.pdf

May be give that a try?
Learning never ends