Hello !
Advice needed urgently.
For 3 years DL160 Gen9 (Sys. ROM U20 v2.00 (12/27/2015)) stood rock solid with Win2k8R2 OS onboard . Five weeks ago I upgraded OS to Win2012R2 and, a month later, out of the blue, got server power-down. In IML log the corresponding to power-down entry gives : Server critical fault (service information runtime fault memory cpu 2 memory channels 1-4 (20h)). After power up there are no status errors in ILO console as if nothing happened.
In documentation for Gen 9 Proliants I have not found such error description, but in “Integrated Management Log Messages and Troubleshooting Guide for HPE ProLiant Gen 10 and HPE Synergy” Part Number: P05789-003 I found the error: Server Critical Fault (Service Information: %1) %2 . According to the Troubleshooting Guide “This message indicates that the CPLD indicated there was a power fault of some type in the system.”
In this forum there was a post with almost exact error : https://community.hpe.com/t5/ProLiant-Servers-ML-DL-SL/moving-hard-drive-and-raid-arra-form-server-hp-proliant-dl460/m-p/7034734#.XQlW-RYzY1g . In that case they solved the problem by moving to another server.
The irony is that the server warranty expired days before this failure, so no AHS log analysis or HP support case for me. I scanned all revision history for DL 160 Gen9 firmware updates and have not found any mention of correcting similar errors.
So have anybody experienced such an error with your servers? What did help you? Should I move to another hardware?
Any advice would be very appreciated.
