HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL160 KVM issue

 
ryro04
Occasional Visitor

DL160 KVM issue

We have 4 new DL160 servers hooked into a 0x2x16 KVM and the mouse does not work. The OS is Red Hat 5.0. Any Ideas? The others servers with the same OS on the same KVM work fine. Thanks Ahead of time!
2 REPLIES
Shiraj Fernando
Regular Advisor

Re: DL160 KVM issue

Did u check if the ps/2 connector is properly plugged in ?

You can also try resetting the KVM. There's a small button at the back of the unit.

Hope this helps.

Regards,
Shiraj.
Shiraj Fernando
Regular Advisor

Re: DL160 KVM issue

We have faced a similar situation. It was a rack with around 11 DL140s. The PS/2 connectors wouldn't lock properly on the server ps/2 ports.

The mouse or the keyboard would intermittently stop working and we had to plug them back in. We replaced the faulty ITFC Adapters the next day.

Regards,
Shiraj