DL160se G6 - iLo 100 - Virtual KVM/Media Login issue

[Deryl Sequeira]

Am trying to remote console in to a DL160se G^ server.

I can connect fine thru iLo but when I click on the Virtual KVM/Media option, it goes thru its regular java spin up and then spits out the following error:

Remote KVMS Viewer

Message: Invalid Username/Password

You have been disconnected

Running iLo100 Firmware 4.22

Its doing this on all 10 of my DL160se G^ servers.

We do not have any sort of AD or Windows integration.

I have tried the default admin ID as well and get the same error...

Someone please help me...

This is in a lights out data center so I dont have the luxury of getting to the motherboard to reset the iLo switch...

Much appreciated.

[PGTRI · Accepted solution]

hi,

Please check the following advisory. It looks similiar to Your issue.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03475947&lang=en&cc=us&taskId=&prodSeriesId=5075942&prodTypeId=15351

Thanks

regards,

[Deryl Sequeira]

Hmm...not the same error but will try it.

BTW..these DL160se are a bunch of crap.

HP did a really **bleep**ty job on building these out and suckering customers into buying it.

[Deryl Sequeira]

PGTRI..

That worked..

Thank you so much for the link

[RWS21]

Hi,

Thanks for the advisory link. But now there is a solution, because as of september 24 2012 HP have presented an firmware update.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=440192&swItem=MTX-d389009ae57d4f5e9d3976b3c0&prodNameId=450129&swEnvOID=1113&swLang=8&taskId=135&mode=3

Please remember that during the years this hyperlink can be outdated, so always look on the HP website for the current version for this specific ilo100 controller.

Regards