ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL165 SATA Driver for 2K8R2 Install

Randy Saeks
Occasional Advisor

DL165 SATA Driver for 2K8R2 Install

Hi there,

I recently purchased a DL165 G6 to run a small app service. When I have the server setup to use SATA mode, I do not see my drives in the Windows server installer screen. Putting them into PATA mode allows them to show.

I tried using the drivers on the Support CD included with the server, however this does not detect the drives in the install mode.

I'd like to use the drives in SATA mode to boot the system but have't had luck. Is there 2K8R2 drivers for this box?

2 REPLIES
marcus1234
Honored Contributor

Re: DL165 SATA Driver for 2K8R2 Install

hmm just a kind tip

you might find members eager if you started assigning points to solutions and suggestions provided to you

your history shows

"I have assigned points to 0 of 16 responses to my questions."

Re: DL165 SATA Driver for 2K8R2 Install

Hi,

You can download and extract raid controller driver in to a USB Flash memory and you can select that driver during OS installation when it is asked (hard drive)

HP ProLiant Integrated SATA Controller Driver for Microsoft Windows Server 2008 R2
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=tr&prodTypeId=15351&prodSeriesId=3955644&prodNameId=3955645&swEnvOID=4064&swLang=8&mode=2&taskId=135&swItem=MTX-c71e1f51b4264c8d8ec70e1ef7

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Regards.
Kind Regards,
Erdogan.
I am HPE Employee

If this helps you with your issue, please click the thumb to register a Kudo.
If it resolves the issue, please consider marking it as an Accepted Solution.
The comments in this post are my own and do not represent an official reply from the company. No warranty or guarantees of any kind are expressed in my reply.