ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL180 G5, DL160 G5 Power Question for Rack

 
dvtechs
Occasional Contributor

DL180 G5, DL160 G5 Power Question for Rack

Hello,
We have about 9 dl160g5 and 5 dl180g5 going into a rack.
New Electric is being run to the rack, so my question:
Can the dl180 and dl160 servers operate (accept) 208v single phase from a PDU?
Looking at the Quick specs, I cannot tell.
We also have a ml350, msa60, dl360, and dl360 going into the rack.
Thanks in advance for the help.
1 REPLY
Matti_Kurkela
Honored Contributor

Re: DL180 G5, DL160 G5 Power Question for Rack

At the top of the "Power Specifications" section of the QuickSpecs of both DL160 G5 and DL180 G5 it says "Operational Input Voltage - 90 Vac to 264 Vac full range".

In other words, the standard PSU modules will accept anything from 90 V to 264 V, single-phase.

Here in Europe, 230 V single-phase is the standard for all normal electrical appliances. We don't need to order any special Euro power supplies, just the correct type of power cords for our sockets/PDUs.

MK
MK