ProLiant Servers (ML,DL,SL)
1748062 Members
5586 Online
108758 Solutions
New Discussion юеВ

DL180 G6 Installation Issue

 
SOLVED
Go to solution
Cole Larson
Occasional Contributor

DL180 G6 Installation Issue

I am attempting to install Win 2008 server on two DL180 G6 Servers.

When the OS is installed 4 devices show up in the Windows device list without drivers. In each case the devices are:
Three instances of an Interrupt Controller
One unknown device labeled as a PCI to ISA bridge.

What are these "other" devices and how do I get them working?
3 REPLIES 3
Gokul Chandola
Trusted Contributor

Re: DL180 G6 Installation Issue

Hi,
you can forget that if you are able to fullfill your requirement.
If you are very much consious about that the install all drivers from Driver CD/CDs, delivered with Server.
Compare with old status(devices) then you will get the exact trace the new device.

Regards,
Gokul Chandola
There is always some scope for improvment.
Gary Antonio Benavides_1
Frequent Advisor
Solution

Re: DL180 G6 Installation Issue

Cole Larson
Occasional Contributor

Re: DL180 G6 Installation Issue

Thanks