HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL180 G6 LO100 web access

 
SOLVED
Go to solution
verracocha
Frequent Visitor

DL180 G6 LO100 web access

I've bought a HP Proliant DL180 G6 with LO100 BMC. I am still unable to access the BMC via http or telnet.

I've found the following on the internet and tried:

  • FIrmware Update of BMC (recent version is now 4..26)
  • BIOS Update (O20)
  • Reset password via IPMItools
  • Reset BMC via J27D
  • Reset user and password via CPLD

Access via serial console (CPLD) and default user/pass is possible. But at accessing by http or telnet default user/pass is declined.

What else can I do?

Thanks in advance.

1 REPLY
verracocha
Frequent Visitor
Solution

Re: DL180 G6 LO100 web access

Problem is solved now by using lo100cfg under Linux.

Thank you.