ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL180G5 with 411064-B21 BBWC p400

MICHAEL SCANTLEN
Occasional Advisor

DL180G5 with 411064-B21 BBWC p400

I have configured this server with a 12 drive Bay config with the built in p400 and will be adding the 411064-B21 p400 512mb BBWC controller to the removable card cage.

Are the internal already supplied cables connecting the backplane of sufficient length to
reach back to the removable card cage and plug into the p400? If not, are there recommended part numbers for longer internal cables?

I have looked at quick specs, user guide, service guide and can't find any pictorial of the cables necessary to plug into this controller. Thanks Mike
2 REPLIES
KarloChacon
Honored Contributor

Re: DL180G5 with 411064-B21 BBWC p400

hi

what about the multi-lane cable mention below

NOTE: The installation of a 12HDD Cage requires the addition of a 4-port SAS controller that supports expanders. A Smart Array Controller, P400 or better, is recommended.
NOTE: The addition of a Smart Array Controller (or 4-port SAS controller that supports expanders) requires the addition a SAS/SATA Multi-lane cable (464830-B21).

regards
Didn't your momma teach you to say thanks!
MICHAEL SCANTLEN
Occasional Advisor

Re: DL180G5 with 411064-B21 BBWC p400

Thank you for the part number! Since the server comes as a smart buy with the 12 bays, I will open it up and see what actually is configured. I don't know where the attachment point is on the system board for this cable to the backplane off hand. (pictorials don't show), so I will open it up Monday Morning. Mike