HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Community
ProLiant Servers (ML,DL,SL)
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

DL180G6 25SFF multipath setup using LSI 9211-8i

 
cfischer
cfischer
Occasional Visitor

‎03-09-2017 04:32 AM

‎03-09-2017 04:32 AM

DL180G6 25SFF multipath setup using LSI 9211-8i

Hi,

we like to use a SE326M1 (probably DL180G6) 25bay SFF as a ZFS based storage server. We've bought an LSI 9211-8i, works well. Now, the backplain has two SAS ports, we thought we could use two LSI controllers running a multipath setup as we do that on SuperMicro Servers, but something goes wrong if both controllers access the disks. The controller init hangs (bios) and the LSI config tool can't read the SAS topology of the second controller. Are there experiences running multipath setups on HP hardware running none HP controller hardware?

 

Thanks

Christian 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.