ProLiant Servers (ML,DL,SL)
1748123 Members
3380 Online
108758 Solutions
New Discussion

Re: DL180G6 initialize only one processor

 
mradovanov
Occasional Contributor

DL180G6 initialize only one processor

I have a DL180G6 server with 2 processors (E5620) and 48GB of memory.

Another technician has installed a second processor and associated memory. He says that the server is showing both processors and all the memory.

 

Now server show only one processor and half of the total memory.

I changed processors between the processor sockets, same situation. Changed the motherboard, the same situation. BIOS upgrade to 2012.10.1 (A), same situation.

 

Server initialize one processor and half of the total memory.

EasySetup shows only one processor and adequate memory (half the total).

 

What's the problem?

3 REPLIES 3
PGTRI
Honored Contributor

Re: DL180G6 initialize only one processor

hi,

 

It's not exactly your issue, but you can give it a try.

 

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02254989&lang=en&cc=us&taskId=101&prodSeriesId=3956238&prodTypeId=15351&jumpid=reg_r1002_usen_c-001_title_r0003

 

Thanks

 

regards,

How to Say Thank You? Just click the KUDOS!
mradovanov
Occasional Contributor

Re: DL180G6 initialize only one processor

Looks like I poor checked processors. I'll let what happened.

mradovanov
Occasional Contributor

Re: DL180G6 initialize only one processor

Yes, it was a faulty processor. Yet.

After replacing the processor, everything works as it should.