DL180G6 network driver

[hp508_1]

Can someone tell me where can I get the correct driver for the NIC for the DL180G6 on server 2008 W32?

[marcus1234 · Accepted solution]

Hi hp drivers here, make sure you have latest bios or driver may not take

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3884340&prodTypeId=15351&prodSeriesId=3884339&swLang=13&taskId=135&swEnvOID=4022#7895


This is how we thank in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

[Creek]

You can find that driver here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=MTX-b100d35534f44afea60a6a0022&jumpid=reg_R1002_USEN

[HP508]

Thanks both above. I got the exact driver and is working now.

Another question is there is only one hard disk come with the system. If we setup the OS now with only one disk on SAS(RAID 0) is it possible to add a second hard disk later and define it to RAID 1 without erase the OS on the first hard disk?

[marcus1234]

if you have raid you can migrate change it if not it cannot be migrated as it is not raid to start with ,

[hp508_1]

Thanks, we have to decide on raid1 before install the OS in this case.