HPE Community
ProLiant Servers (ML,DL,SL)
1753849 Members
8092 Online
108807 Solutions
New Discussion

DL180G6 sometimes does not find boot device on reboot

 
obrockmann
Occasional Contributor

‎04-24-2016 12:45 PM

‎04-24-2016 12:45 PM

DL180G6 sometimes does not find boot device on reboot

we have a DL180G6 with a P410i RAID setup. This machine has been running without hw modification for a couple of years. It has a USB drive attached for backup. Boot target in BIOS point to Harddisk first and Hardisk points to the P410i.

Recently it occurs on scheduled reboots that the server does not come up. It's caught looking for a boot device. We have to power it off via ILO then and after repowering it boots fine.

In the Log there is a message "Gen ID 0x41 unavailable"

Anyone seen this before? How can we get rid of it?

Thanks for any hints! Oliver

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.