ProLiant Servers (ML,DL,SL)
1748169 Members
4057 Online
108758 Solutions
New Discussion

DL320 G2 Startup POST

 
Dave McMullin
New Member

DL320 G2 Startup POST

Do you need at least 1 memory sims seated on the board in order for DL320 G2 to perform a post?

I have DL320 G2 without any memory sims, no hard disks, just a dvd drive, all I get is CPU failure led glowing red. I do not suspect the CPU to be at fault.

Suggestions?
1 REPLY 1
Oleg Koroz
Honored Contributor

Re: DL320 G2 Startup POST


Should work with one module
http://h18000.www1.hp.com/products/quickspecs/11512_na/11512_na.HTML
http://docs.hp.com/en/293164-004/293164-004.pdf

Verify Server Part number for Configuration: CPU Speed ...

Check from user guide what else you missing; reset Riser; install memory ...