HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320 G2 Startup POST

 
Dave McMullin
Occasional Visitor

DL320 G2 Startup POST

Do you need at least 1 memory sims seated on the board in order for DL320 G2 to perform a post?

I have DL320 G2 without any memory sims, no hard disks, just a dvd drive, all I get is CPU failure led glowing red. I do not suspect the CPU to be at fault.

Suggestions?
1 REPLY
Oleg Koroz
Honored Contributor

Re: DL320 G2 Startup POST


Should work with one module
http://h18000.www1.hp.com/products/quickspecs/11512_na/11512_na.HTML
http://docs.hp.com/en/293164-004/293164-004.pdf

Verify Server Part number for Configuration: CPU Speed ...

Check from user guide what else you missing; reset Riser; install memory ...