ProLiant Servers (ML,DL,SL)
1753560 Members
5810 Online
108796 Solutions
New Discussion

DL320 G5 P BOOT PROBLEM

 
tabbech fatma zohra
Occasional Contributor

DL320 G5 P BOOT PROBLEM

HELLO TEAM,

we have to install three DL's 320 G5 P with 2003 server 32 bit, the issue is that all servers can't follow the full Smart start setup, we recieve an error message related to the controllers, somthing like thqt ''intel (R) 8280 1GR...... SATA RAID)

have you an idea about that?

thank you in advance;;;

sincerly

1 REPLY 1
Gary Benavides Meza
Trusted Contributor

Re: DL320 G5 P BOOT PROBLEM

That's becuase you should be using the embedded SATA controller on the Proliant DL320 G5 and the smart start doesn't support the OS installation using the embedded SATA. You need to manually load the driver by pressing F6 when prompted during the OS installation and have the embedded SATA Driver extracted to a floppy:

Driver:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=3201178&prodNameId=3288095&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-9553913a25fe499aa09e22cfe2