DL320 G5 & Win2003 Blue Screen - Help!!!

[zzmusam]

Dear All,

I have a DL320 G5P server running Windows 2003 Server. The server was originally configured with a single SATA drive connected to the embedded SATA controller.

I was told by HP Support during the inital setup that I could add a second SATA drive at a later date and then create a RAID 1 array without impacting the original Win 2003 installation.

I was advised to disable the embedded SATA in the BIOS during the initial Win 2003 single SATA disk installation, this completed fine.

I was told that when I received the second SATA drive to manually install the Win2003 embedded SATA driver from the DL320 G5P support page, enable the RAID in BIOS and then create the RAID 1 array taking the option to copy data from original SATA disk during the array creation. This has all worked fine, however when I try to boot the server Windows reports a STOP: 0x0000007B (0XF789AA94,0XC0000034,0X00000000,0X00000000)

Any assistance that could be provided would be greatly appreciated.