HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320 G5p Memory Upgrade

 
SOLVED
Go to solution
johnnywalker02
Occasional Visitor

DL320 G5p Memory Upgrade

Hi everyone,

 

I'm attempting to upgrade the memory in a Cisco MCS-7825-H4 (rebranded DL320 G5p) from 2x1Gb to >= 4Gb. I ordered 3 Crucial kits matching their recommendation (CT2KIT25672AA80E) as I had a few devices in need of the same memory, but I was unable to get the memory to work in the DL320 in any combination. There are LEDs adjacent to the DIMM slots, and these were lit red with the new memory.

 

The specifications of the memory used:

DDR2 PC2-6400 • CL=5 • Unbuffered • ECC • DDR2-800 • 1.8V • 256Meg x 72 •

 

Quote from DL320 G5p specifications:

Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory

 

Any ideas before I send the memory back and order some other to try? The only major difference I see is CL=5 vs typical CL=6, but I've never seen a problem from better CL specs.

2 REPLIES
Suman_1978
HPE Pro
Solution

Re: DL320 G5p Memory Upgrade

Hi,

 

According to my experience with HP ProLiant Servers, they support or works better with HP Branded DIMM.

Also when I check the specs differences between CT2KIT25672AA80E and HP DIMM supported on this server, I dont see any details about CL5 or 1.8v from HP.

 

I guess the voltage or Case Latency is mis matching.

 

Good Luck.

Thank You!

I am a HP employee.

johnnywalker02
Occasional Visitor

Re: DL320 G5p Memory Upgrade

That's about all I could come up with too. Thanks for the info!