HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320 G5p - Smartstart does not see array

 
SOLVED
Go to solution
Cloverfield
Occasional Visitor

DL320 G5p - Smartstart does not see array

Trying to define a RAID 1 array through Smartstart. Tried current version Smartstart and older versions with no luck. It does not see the array. BIOS has SATA enabled. Will be using Windows 2003 server. Any ideas?

1 REPLY
SMR
Valued Contributor
Solution

Re: DL320 G5p - Smartstart does not see array

Hi,

 

The integrated 4 Port SATA controller on the 320 G5p is not supported by SmartStart, you'll need to install a SmartArray controller to use SmartStart for Windows deployment or simply use the Software RAID capabilities of the integrated controller and deploy Windows with it's own installation media.