ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320 RAID problem

 
Warren_9
Honored Contributor

DL320 RAID problem

I wanted install the RH Enterprise WS 2.1 on the DL320. During the installation, the OS can't reconize the RAID (suppose a /dev/sda found).

I try the use the driver for RH7.3, RH8, RH9 and AS2.1 but can't fix it.

The RH7.3, RH8 and RH9 drivers were downloaded from the LSI.
And the AS2.1 driver was downloaded from HP.

Anyone know where can I find the WS2.1 driver?

or how to disable the ATA Raid.

thx,
Warren
2 REPLIES
Jake ~zippo~
Frequent Advisor

Re: DL320 RAID problem

Hi Warren,

you may like to refer page below

ProLiant DL320 (IDE & SCSI) :
http://hardware.redhat.com/hcl/?pagename=details&hid=1052

ProLiant DL320 (IDE Only) :
http://hardware.redhat.com/hcl/?pagename=details&hid=1050


Regards,
Jake
Freedom is offered to man and given to him as a task.
Warren_9
Honored Contributor

Re: DL320 RAID problem

Jake,

Thx for you reply.

Base on the HP Supported OS matrix, the DL320(G2)-ATA is supported RH Enterprise Linux 2.1, which means the OS is tested and drivers are available.

But only the AS2.1 driver can be downloaded from the HP site.

regards,
Warren