HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320 SATA RAID Windows 2003 Installation Problem

 

DL320 SATA RAID Windows 2003 Installation Problem

I have a DL320 G3 with 2 SATA drives configured for RAID 1. I am using ILO Advanced to perform the OS install since there are no CD or FDD drives in the machine.

During the install, after specifying the SATA driver I get the message:

File \win32\aarich.sys caused an unexpected error (18) at line 2187 in d:\srv03rtm\base\boot\setup\oemdisk.c

Does anyone know how to resolve this issue

Thanks

Allan
5 REPLIES
Terry Hutchings
Honored Contributor

Re: DL320 SATA RAID Windows 2003 Installation Problem

How are you specifying the driver? Are you using the virtual cd or the virtual floppy option? Both can't be used during an install of the OS.
The truth is out there, but I forgot the URL..

Re: DL320 SATA RAID Windows 2003 Installation Problem

I was using both - I don't have a CD or FDD in the machine so this is the only way. SmartStart 7.2 does not support SATA Raid and I am following the instructions supplied in order to perfrom the install.

Re: DL320 SATA RAID Windows 2003 Installation Problem

I had the same issue with a local CD drive. However, I am having a bit more luck after downloading smartstart 7.3 - it does not support the SATA Raid but does appear to include a different driver. Thanks for your help so far.

Re: DL320 SATA RAID Windows 2003 Installation Problem

It would appear that you can only use one device at a time when installing the OS - a bit disappointing. Thanks for your help.

Re: DL320 SATA RAID Windows 2003 Installation Problem

A local floppy or preferably CD ROM must be used to install the OS - a local CD was also required for the firmware updates