Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

oriol_sanchez
Occasional Visitor

DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

Hi,

 

Just installed new DL320 g8. We have only one HD and we're in a hurry, so proceed installing WIndows 2012 R2, hiper-V.

Spent 3 days working.

 

Now we've the second disk.

 

Dos anyone knows if it's possible to migrate RAID-0 to Raid-1 without loosing data.

 

How?

 

Thanks,

2 REPLIES
taitadam
Occasional Visitor

Re: DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

Did you find a solution to this? I am in exactly the same position.

 

Thanks

Adam

Highlighted
sfora
Frequent Advisor

Re: DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

I don't know if it is possible in that very basic controller.

 

If it is possible, I think you will need write cache and a battery and it should be done in the Array Configuration utility

 

Here is the manual:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf