ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360-G: both Nics are disabled !!!

 
it61066
Frequent Advisor

DL360-G: both Nics are disabled !!!

When booting server, after showing the ethernet boot agent I got an error PXE-E01 : Unsupported PCI devices. Entering RBSU, it shows MAC Address for Nic 1/2 : Nic disabled.

Biios upgraded to latest revision (P26), same problem.

No option to enable the NICs; please help.
HPE ASE Proliant & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)

3 REPLIES
Terence Tsao
Frequent Advisor

Re: DL360-G: both Nics are disabled !!!

hi,

did you ever enter RBSU by pressing F9.
pls check "system options" ,and you can see PCI device info, is there any PCI device disabled ? If NIC is disabled, enable it.
Regards.
it61066
Frequent Advisor

Re: DL360-G: both Nics are disabled !!!

...this is the main problem: no ethernet adapters listed under PCI - only two iLO controllers are shown there!!!
I can enable/disable the PXE support on any NIC in the system options.

When PXE is enabled, the Ctrl-S shows at boot but it is followed directly by the PXE-E01 error (Unsupported PCI devices) and i cannot enter the Ctrl-S menu in any way.

Thanks.
HPE ASE Proliant & Storage Certified Engineer
Clustering & Virtualization Support (Microsoft & Vmware)

Terence Tsao
Frequent Advisor

Re: DL360-G: both Nics are disabled !!!

Server couldn't find NIC when h/w initialed, maybe we should replace the system board .