cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G1, G2

 
Bolliger Andre
Occasional Contributor

DL360 G1, G2

How can I move my Windows 2k server installation from a DL360 G1 to a DL360 G2?

I tried with sysprep and a image made with powerquest driveImage but the G2 is not able to boot after restoring the image to it. Then I tried to start the recovery console on the G2 but "no Harddisks present Error" occurs.
2 REPLIES
Paul Wallace_1
Occasional Visitor

Re: DL360 G1, G2

the two machines use a difrent raid controller. You will need to sysrpep and use the 5i contoller drivers on the g2. Make a drive forlder in the sysprep folder and referance it in the sysprep.ini answer file.
When all else fails. Read the instructions!
Bolliger Andre
Occasional Contributor

Re: DL360 G1, G2

Thanks for the tip. It was a bit difficult but after downloading sysprep 1.1 witch focus directly to that problem and comes with a description about this i finally made it work.