HPE Community
ProLiant Servers (ML,DL,SL)
1753767 Members
5888 Online
108799 Solutions
New Discussion

Re: DL360 G1 Need to enter BIOS to add Boot Order

 
Rick Cromi
Occasional Advisor

‎11-17-2008 07:12 AM

‎11-17-2008 07:12 AM

Re: DL360 G1 Need to enter BIOS to add Boot Order

The firmware update didn't seem to apply to the CD-ROM drive installed.

However, it is clear that the CD-ROM drive is the problem. Despite the fact that it is detected and there are no errors reported, the drive isn't working.

In any case, after upgrading hardware in all other servers, I used another DL360 to build the drives, then swapped them out with this server. After booting to OS, the CD-ROM is detected and there are no errors reported, but no CDs will run in it.

Thanks to all for the excellent suggestions.

Rick
0 Kudos
Rick Cromi
Occasional Advisor

‎11-17-2008 07:14 AM

‎11-17-2008 07:14 AM

Re: DL360 G1 Need to enter BIOS to add Boot Order

Thread closed.
See last post.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.