HPE Community
ProLiant Servers (ML,DL,SL)
1753765 Members
5522 Online
108799 Solutions
New Discussion юеВ

Re: DL360 G2 / 5i controller and Win2k installation

 
Mike Vincent
New Member

тАО10-28-2002 02:14 PM

тАО10-28-2002 02:14 PM

DL360 G2 / 5i controller and Win2k installation

I've got a new Dual 1.4Ghz DL360 G2 with mirrored 18Gb drives.

Attempting to install Win2k. I use F6 when prompted to load 5i controller driver from floppy. This loads successfully but when Win2k install continues it errors with "no hard drives found" error.

I've tried Smartstart with integrated OS installation and also just hardware configuration.
0 Kudos
Reply
2 REPLIES 2
Victor Pendlebury
Valued Contributor

тАО10-29-2002 03:17 AM

тАО10-29-2002 03:17 AM

Re: DL360 G2 / 5i controller and Win2k installation

Hi

Have you checked your boot controller order in the Bios ( F9 ) ?
Smart 5i should be in position #1 ( default is #4 )

Regards

Vic
0 Kudos
Reply
Mike Vincent
New Member

тАО10-29-2002 08:53 AM

тАО10-29-2002 08:53 AM

Re: DL360 G2 / 5i controller and Win2k installation

Bingo! Thanks Vic!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.