ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360, G2'; NIC7780, Perflib errors

Melinda Cooper
Frequent Advisor

DL360, G2'; NIC7780, Perflib errors

For over a year I've attempted to solve the Application Event Stop 'perflib' errors; Event ID 1010 that continually show up on the above Compaq models that have the Broadcom NIC7780 card.
What I've attempted:
-Upgraded to Service Pack 3 was suppose to fix this, it didn't;
-I did an install of Softpaq CP002876.exe that didn't work;
-Solution id 215.0.235519143.4035366 from hp - Installed exctrist.exe (this is MS Knowledge base art 158874/152513) that also didn't work;
-I tried upgrading the NIC 7780 driver to 2.75 you guessed it that didn't solve the problem.
-The latest attempt was in reference to MS Q819716 hotfix. That also didn't work.

These stop errors are annoying and I'd like to remove them, has anyone tried something different?

1 REPLY
Zigor Buruaga
Esteemed Contributor

Re: DL360, G2'; NIC7780, Perflib errors

Hi,

Look at this link, maybe you can find it usefull.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x28235bd3782dd711abdc0090277a778c,00.html

Hope this helps.
Kind regards,
Zigor