ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

DL360 G3 1Gb unstacked memory issues

John_761
Occasional Contributor

DL360 G3 1Gb unstacked memory issues

Is anyone aware of any advisory about mixing unstacked with stacked dimms in a DL360 G3. We have a number of issues with memory and have found that this appears to be the case and that the replacement part no. from HP is the same for both. Any help appreciated.
Thanks
3 REPLIES
Nathan Gervais
Trusted Contributor

Re: DL360 G3 1Gb unstacked memory issues

Does it help if you swap the chips slots?

What if you run with just 1 DIMM for a while do the errors go away?

And then swap to the other?

Might be a faulty ram chip. Or could be that there different assembly numbers.
Prashant (I am Back)
Honored Contributor

Re: DL360 G3 1Gb unstacked memory issues

Hi,

Please share the part infomration for the same meory and the error message reported on the same or it leads to no display.

Regards,
Prashant S.
Nothing is impossible
John_761
Occasional Contributor

Re: DL360 G3 1Gb unstacked memory issues

Hi all
Thanks for the response and queries hopefully answered below.
The part no. is 261585-041 (aka spares part no. 300701-001)and they have to be put in pairs with only 2 banks available (4 slots).
When the stacked pair are put in bank 1 and the unstacked pair are put in bank 2 the POST reports that there is mismatched pairs in bank 2. If the stacked pair are put in on their own then it boots ok. If the unstacked pair are put in on their own then it fails to come on, the same goes if I mix either of the unstacked dimms with one of the good stacked ones in a pair. Regards