ProLiant Servers (ML,DL,SL)
1753930 Members
10017 Online
108810 Solutions
New Discussion

Re: DL360 G3 NT LOADER error

 
Roy Berry_2
Frequent Advisor

DL360 G3 NT LOADER error

We are running Windows 2000 with SP4 HP ProLiant DL360 G3 Server series using disk mirroring. When we reboot the server (we have 6 of these's servers)we receive an error message saying "NT LOADER NOT FOUND" during the reboot process. Window hangs during once that error message is display.

Please Advise!
1 REPLY 1
e4services
Honored Contributor

Re: DL360 G3 NT LOADER error

Look to Microsoft Support.
Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. The name and physical location are recorded by the separate operating systems for the Windows NT Loader (NTLDR) to display when the computer is started. NTLDR checks the registered path to the %SystemRoot% folder for Windows 2000 to start, whether it is on a hard disk or on removable media. If it exists, the operating system starts. If it does not exist, an error message is generated. Insert the correct disk or cartridge and then reset the computer.
For you it can not find NTLDR so there is some pah problem in the installation
Hot Swap Hard Drives